Street News

Customizable Trail Rocker from Painless Performance

Introducing the brand new Customizable Trail Rocker from Painless, allowing you to control up to eight accessories on your custom application! The heart of this kit is enclosed in the weatherproof housing that surrounds the power center with eight fuses and relays.

The underside of the fuse & relay cover has a built in gasket to help keep any moisture out and to act as an extra support for the relays.

 

Attention to detail shows in this bolt with O-ring combo to hold the top cover on.

 

The power center then provides you with all the necessary wiring to connect to any 12v accessory ranging from lights to air lockers. Easily installed with our detailed instructions and plug-n-play design.

Exiting the fuse & relay center we provide you with 21’ of wire to reach any 12 volt accessory you have.

 

Printed every 12” on the wire you’ll find the circuit description, a signature touch of ours.

 

Also provided is a switch input harness for controlling all of your accessories. Simply wire these connections into your own switches.

This harness attaches the fuse & relay center to your switch panel. It’s a plug-n-play design that allows for your switch panel to be disconnected if needed.

 

Key Features –

  • Control up to 8 accessories, (8) 30 amp fuses and (8) 30 amp relays
  • Weatherproof housing around the power center
  • Allows for custom mounting
  • Allows for wiring in your own switches

 

Winch Ready! The Trail Rocker system includes dedicated wires for controlling a winch. Purchase of our Winch Control Add-on Kit part number 57150 is required for operation.

 

For more info on this product, Click Here

 

Social Media –

Facebook

Twitter

Instagram

About Jefferson Bryant (223 Articles)
A life-long gearhead, Street Tech Magazine founder and editor Jefferson Bryant spends more time in the shop than anywhere else. His career began in the car audio industry as a shop manager, eventually working his way into a position at Rockford Fosgate as a product designer. In 2003, he began writing tech articles for magazines, and has been working as an automotive journalist ever since. His work has been featured in Car Craft, Hot Rod, Rod & Custom, Truckin’, Mopar Muscle, and many more. Jefferson has also written 5 books and produced countless videos. Jefferson operates Red Dirt Rodz, his personal garage studio, where all of his magazine articles and tech videos are produced. You can follow Jefferson on Facebook (Jefferson Bryant), Twitter (71Buickfreak), and YouTube (RedDirtRodz).

Leave a comment

Your email address will not be published.


*


This site uses Akismet to reduce spam. Learn how your comment data is processed.